Correct way to load steel coils
Release time:
2024-07-29
Horizontal loading: When the ratio of the width to the diameter of the steel coil is greater than 0.7, horizontal loading should be selected. Horizontal loading is divided into transverse loading and longitudinal loading. The specific method to be selected depends on the size of the steel coil and the transportation conditions.
There are two main ways to correctly load steel coils: vertical loading and horizontal loading.
Vertical loading: When the ratio of the width to the diameter of the steel coil is less than or equal to 0.7, the vertical loading method should be selected, and the axis of the steel coil hole is perpendicular to the loading plane. This loading method is suitable for small steel coils and can effectively prevent them from rolling during transportation.
Horizontal loading: When the ratio of the width to the diameter of the steel coil is greater than 0.7, the horizontal loading method should be selected. Horizontal loading is divided into horizontal loading and longitudinal loading. The specific method to be selected depends on the size of the steel coil and the transportation conditions. The following points should be noted when loading steel coils: Use fixed seats and wave racks: Fixed seats and wave racks should meet the safety requirements of transportation. It is recommended to use #16 channel steel and 8mm steel plates. Rubber sheets should be padded at the bottom and tied with bolting devices.
Use sleepers and triangular wood: Lay wooden boards or anti-slip grass mats at the bottom of the cargo compartment to increase friction and reduce the possibility of sliding. Sufficient pads should be used between any two steel coils, and some triangular wood should be prepared before leaving the vehicle in case of emergency.
Reasonable tying: After loading, tighten the wire rope with a hand-cranked hoist to ensure that each steel coil is firmly fixed.
Practical suggestions and tips:
Choose the appropriate loading method: Choose the appropriate loading method according to the size and weight of the steel coil to ensure safety and efficiency.
Use special brackets and containers: For large or heavy steel coils, using special brackets or containers can better fix and protect the steel coils.
Through the above methods, the safety and stability of the steel coils during transportation can be effectively ensured.
RELATED NEWS
Correct way to load steel coils
Horizontal loading: When the ratio of the width to the diameter of the steel coil is greater than 0.7, horizontal loading should be selected. Horizontal loading is divided into transverse loading and longitudinal loading. The specific method to be selected depends on the size of the steel coil and the transportation conditions.
2024-07-29
Why steel and concrete work together
Economical: Taking advantage of the high compressive strength of concrete and the strong tensile strength of steel bars, materials can be used reasonably and costs can be saved.
2024-06-28
The difference between steel pipe and iron pipe
Steel pipes and iron pipes are two common piping materials. They each have unique properties and are widely used in different engineering and application scenarios.
2024-08-04
In the medical field, surgical plates and medical steel plates usually use materials such as stainless steel or titanium alloys, which have good biocompatibility and corrosion resistance and are suitable for implants in the human body. Although these surgical materials may contain iron elements, they are specially designed and processed alloys to meet specific medical requirements, rather than simple iron products.
2024-04-18
The surface treatment of carbon steel will also affect its rust resistance. The surface of unprotected carbon steel is susceptible to corrosion, while carbon steel that has been galvanized or otherwise protected can slow down the rate of rust.
2024-05-26
What material is carbon steel coil plate made of?
A material composed of carbon elements between metals and non-metals. It has good electrical conductivity, thermal conductivity, corrosion resistance and other characteristics. It can be used to process high-temperature components, generator parts, etc., and can also be used in ships, slopes, etc. and mechanical seal materials and other fields.
2024-03-21
CONTACT US
Email : boss@tiscosteelltd.com
Tel : +8615806691035
WeChat : +8615806691035
Address : Room 2702, Unit 1, Building 4, Yurun International Haoting Community, Dongchang East Road, Dongcheng Street, Economic and Technological Development Zone, Liaocheng City, Shandong Province, China
Copyright : Shandong Lu Tisco Stainless Steel Co., Ltd.
